See what our Experts say about this Draw-Tite Trailer Hitch Ball Mount

• Why is There Only a Class I Trailer Hitch for my 2025 Toyota Corolla Hatchback?
  Hello Eric. Congrats on the new 2025 Corolla Hatchback! Yes, the only hitch that I see for the 2025 Toyota Corolla Hatchback is the Curt Trailer Hitch Receiver # C11567 which is a Class I with a 1 1/4" receiver. I checked the previous years and it looks like they only had a Class I as well. When a vehicle only has a class I available, it's because that vehicle is not supposed to be hauling anything heavier. I would check your owners manual to see what Toyota says the vehicle can handle....
  view full answer...
• What is Draw Tite Draw Bar 3590 Fit
  Hey Kelly, I found the Draw Tite draw bar part number which we carry # 3590 which is for Class I trailer hitches. I was not able to find the Redline part number though. Was that also listed on the 3590?
  view full answer...
• Trailer Hitch and Wiring for a 2017 Volkswagen Golf Alltrack
  Trailer hitch # 24949 is a fit for the 2017 Volkswagen Golf Alltrack. It also is listed for all models of the 2017 Golf Sportwagen. I have included a link to the installation instructions for you. If you plan on doing some towing the recommended ball mount is # 3590. For a 1-7/8 inch ball use # 19257 and for a 2 inch ball use # 19258. And for trailer wiring you can use # 118730 to add a 4-Way flat to the rear of the vehicle. If you want to use the hitch for an accessory such as a bike...
  view full answer...
• Recommended Trailer Hitch for 2002 Saturn SL2 Dual OHC Sedan
  I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11298, for your 2002 Saturn SL2 Dual OHC Sedan. You will need to drill two holes in order to install this hitch onto your vehicle. I attached the installation instructions for this product for you to check out. As long as the trailer you plan to tow has a tongue capacity that is lower than 200 lbs and has an overall trailer weight that less than 2,000 lbs this hitch will work. When determining what the overall...
  view full answer...
• Recommended Trailer Hitch Receiver to Fit 2013 Volkswagen Passat 2.0L Diesel
  For your 2013 Volkswagen Passat Diesel I recommend the Draw-Tite Sportframe Trailer Hitch Receiver # 24880. This is a Class I hitch with 2,000 pound maximum towing capacity and 200 pound maximum tongue weight. It has the same capacities as the Curt # C11234 however the Curt requires using a support strap, part # 18050 whenever carrying a non-trailer load like a bike rack or cargo carrier. If you're going to be towing a trailer with your Passat you'll also need a wiring harness. The...
  view full answer...
• Is there a Way to Adapt Flat Bar Receiver to Regular Square Receiver on a 2000 Dodge Grand Caravan
  The only way to convert your hitch to a standard receiver would be to have one welded on. But the much safer option is to install a different hitch. I recommend Draw-Tite hitch # 36296 for the 2000 Dodge Grand Caravan because with it the receiver will be the only part visible and the receiver is tight against the bumper from better ground clearance. I have linked a video showing an example installation of this hitch for you.
  view full answer...
  
• Curt Trailer Hitch, part # C11298 Recommendation for a 2002 Saturn L-Series
  Yes, this Curt Trailer Hitch, part # C11298, would be the right hitch to use on your 2002 Saturn L Series. You will need to drill two holes in order to install this hitch onto your vehicle. I attached installation instructions for you to check out also. As long as the trailer you planned on towing had a tongue capacity that was lower than 200 lbs and had an overall trailer weight that was less than 2,000 lbs this hitch would work. You should still check the owner's manual of your Saturn...
  view full answer...
• Availability of Flat Ball Mount for Use in a 2-inch x 5/8-inch Shadow-Mount Hitch
  Thank you for providing a photo of your 2-inch x 5/8-inch shadow-mount hitch. This type of hitch is now obsolete and we offer no ball mounts for it.
  view full answer...
  
• Can a 2015 V6 AWD Honda Crosstour Tow 2 Snowmobiles
  As long as the gross trailer weight is under the 1,500 pound capacity and the tongue weight is under the 150 pound capacity of the 2015 Honda Crosstour then you will be good to go as far as occasionally towing the trailer. If the trailer is heavier than the capacity of the vehicle I can't recommend towing it. The suspension would be fine because if the trailer is within the capacity of the vehicle then the tongue weight would be just 150 pounds which it should not have a problem handling...
  view full answer...
• Recommended Trailer Hitch And Wiring for 2015 Honda Crosstour
  The trailer hitches we offer for your 2015 Crosstour are all Class l hitches and have a 1-1/4 inch receiver opening. The hitch I recommend is the Curt, part # C11002. The hitch can be used for some light towing if that is what you have in mind.For a ball mount I recommend part # 3590. For a 1-7/8 inch hitch ball you can use part # 19256, and for a 2 inch hitch ball you can use part # 19258. If you need a trailer connector on your Crosstour I recommend part # 118642. This is installed...
  view full answer...
• How Much Can a 2005 Subaru Baja Tow
  The towing capacity of 2005 Subaru Baja is listed as 1,000 lbs for trailers without brakes or 2,400 lbs for trailers with brakes. In order to tow a trailer you will need a trailer hitch like the Curt Trailer Hitch Receiver part # C11280, a trailer wiring harness like the Hopkins Plug-In Simple Vehicle Wiring Harness part # HM11143875, and a ball mount/hitch ball like the Draw-Tite Drawbar part # 3590 with the 2" Hitch Ball part # 19258 and Pin and Clip part # PC2. Since the # C11280 hitch...
  view full answer...
• Recommended Trailer Hitch For 2013 Volkswagen Passat TDI To Tow Trailer For Motorcycle
  I recommend installing a trailer hitch like part # 24880 on your Passat, and using a motorcycle trailer to carry your bike. None of the trailer hitches we offer are capable of handling a 550 lb motorcycle in a carrier. The trailer hitches we offer are all Class l hitches and have a 1-1/4 inch receiver opening. The ball mount I recommend for your hitch is part # 3590. Then for a 1-7/8 inch trailer ball I recommend part # 19256. For a 2 inch trailer ball I recommend part # 19258. You would...
  view full answer...
• How to Determine Towing Capacity of 2018 VW Passat
  The best way to determine what your vehicle can tow is by looking at its owner's manual. Unfortunately, VW manuals are hard to find online unless you own the car already so I don't have a way to look at it for you. From the research I did it seems that the max towing capacity of your 2018 Passat is 1,000 pounds which sounds pretty likely. I recommend checking your manual to be certain though. Once you know how much you can tow you'll need the parts to do it. The hitch I recommend is...
  view full answer...
• What is the Correct Ball Mount for a 2003 Toyota RAV4 with a Class I Draw-Tite Trailer Hitch
  On a Class I trailer hitch, you must use the ball mount recommended by the trailer hitch manufacturer or it will void the hitch warranty. this is because that specific hitch has been tested with and rated for use with a specific ball mount and has been determined to be the best option. This information can be found near the bottom of the hitch instructions, linked for reference. They state that ball mount # 3593 is correct for this hitch and vehicle. The instructions all state that it...
  view full answer...
• Trailer Hitch and Wiring for a 2013 Chevy Sonic RS to Tow a Motorcycle
  In order to transport a motorcycle using your 2013 Chevy Sonic RS it will have to be towed on a trailer. The problem is that the bike is too heavy to carry it on a hitch mounted carrier. They do make small trailers designed for motorcycles so you won't need a huge trailer. For a trailer hitch I recommend Draw-Tite model # 24878. The recommended ball mount is # 3590. For a 1-7/8 inch ball I recommend # 19256 and for a 2 inch ball I recommend # 19258. For trailer wiring I recommend # 118640...
  view full answer...
• Trailer Hitch Recommendation for 2015 Honda Crosstour
  Torklift manufactures hitches that are designed for heavy duty applications like full sized trucks. Their hitches would have capacities ranging from 15 to 30K, which would be well over the towing capacity of your Crosstour. The hitches available for your 2015 Honda Crosstour are all Class I, which would have a 2000 lbs towing/200 lb tongue weight capacity. This capacity would be limited by the capacity of the vehicle itself, which is 1000 to 1500 lbs, depending on how its equipped. I'd...
  view full answer...
• Trailer Hitch Recommendation for a 2013 Chevy Sonic Hatchback
  The Draw-Tite hitch # 24878 is a confirmed fit for your 2013 Chevrolet Sonic Hatchback. I have included a link to the installation instructions for you. If you plan on doing some towing the correct ball mount is # 3590 and the correct pin and clip is # PC2. For a 1-7/8 inch ball use # 19256 and for a 2 inch use # 19258. For trailer wiring use # 118640. I have linked instructions for the wiring as well.
  view full answer...
• Recommended Towing Components for 2015 VW Golf Sportwagen TDI with DSG Transmission
  For your 2015 VW Golf TDI, I recommend the Draw-Tite Sportframe Trailer Hitch Receiver # 24949. Then for a ball mount I recommend the Draw-Tite # 3590 which comes with the pin and clip included. For your hitch ball, I recommend # 19256 for a 1-7/8 inch diameter or # 19258 for a 2 inch ball. For your trailer wiring, I recommend the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector # C59236. This will require splicing into your factory wiring with quick splice connectors...
  view full answer...
• Correct Ballmount for a 2008 Subaru Outback
  Both Class I and Class II trailer hitches are tested and rated with the specific ball mount for that hitch, therefore the ballmount used must be the one that is recommended by the trailer hitch receiver manufacturer. If your vehicle is equipped with a factory Class I, or Class II I can make the following recommendations based on the manufacturer. Class I or Class II hitch that is manufactured by Curt I recommend the # C45519 ball mount. Class II hitch that is manufactured by Draw-Tite,...
  view full answer...
• Towing Equipment For 2015 Volkswagen Golf SportWagen & 2015 Subaru Crosstrek
  According to my research the 2015 Volkswagen Golf SportWagen towing capacity is around 2000lbs and the 2015 Subaru Crosstrek has a towing capacity of 1500 lbs. Please confirm with your respective vehicle's owners manual before proceeding. In this situation I would go with the car that has the highest towing capacity, which appears to be the SportsWagen, but I will give towing options for both. For the 2015 Volkswagen Golf SportWagen I recommend the Draw-Tite Sportframe Trailer Hitch Receiver...
  view full answer...
• Trailer Hitch and Wiring Harness Recommendation for 2013 VW Passat TDI SE
  We offer several light-duty Class I trailer hitch for your 2013 VW Passat TDI SE that can be seen on the link provided. All will require similar installation steps including temporary lowering of the exhaust (for better frame access) and trimming of the rear fascia and/or under-body panels. I suggest Draw-Tite # 24880 along with ball mount # 3590 and either 1-7/8-inch ball # 19256 or 2-inch # 19258. Written instructions and a video on hitch installation are linked for your reference along...
  view full answer...
• Recommendation for a Trailer Hitch for A 2006 Toyota Prius
  The trailer hitch recommended for your 2006 Toyota Prius is the Draw-Tite Sportframe Trailer Hitch # 24808. The Draw-Tite hitch is a custom-fit hitch that does not sacrifice on quality even though this hitch is the most cost efficient that we carry for the Prius. You need to note that the owner's manual for the 2006 Toyota Prius states that your vehicel is not recommended for towing and if you decided to tow with your Prius you will be towing at your own risk. If you decide to tow, then...
  view full answer...
• Trailer Hitch Installation Difficulty on a 1997 Honda CR-V
  We rate hitch installation difficulty based on how long it would take the average do-it-yourselfer who had all the required tools and perhaps a helper. We have rated the Draw-Tite Trailer Hitch, # 24790, for the 1997 Honda CR-V, a 5 out of 10 meaning that it will take about 50 minutes or so to install the hitch. I have included a link to the installation details below. If you plan on doing some towing with this hitch, Draw-Tite recommends only using ball mount # 3590. You can use hitch...
  view full answer...
• Does Draw-Tite Trailer Hitch # 24790 Include Mounting Hardware for a 2000 Honda CR-V
  Yes, trailer hitch # 24790 does include the installation hardware for installation on your 2000 Honda CR-V. I have included a picture showing the hardware. I have also included a link to the installation instructions to the right for you. If you are planning on doing any towing with the hitch, first consult the vehicle owners manual for the CR-V towing capacities. For a ball mount use # 3590. For a 1-7/8 inch ball use # 19256 and for a 2 inch ball use # 19258. For trailer wiring use # 118336.
  view full answer...
  

Do you have a question about this Trailer Hitch Ball Mount?